Hydrogel-filled micropipette contact systems for solid state electrochemical measurements

This paper reports on the use of a novel microcapillary system for solid contact electrochemical measurements. The probe is made of moveable micropipettes, with orifice of 1–30-μm radii, filled with a conducting hydrogel, which forms a thin-gelled meniscus at the pipette end. The hydrogel is made of 2 % (w/v) agarose and water solutions, containing KCl or KNO3 as supporting electrolytes. The micropipette can be brought in contact with a conducting substrate to form a microcell, which allows performing voltammetric measurements confined within limited contact regions. The suitability of the proposed probe for local electrochemical measurements are tested using two electroactive species, dissolved in the hydrogel, namely [Fe (CN6)]4- and Ag+ ions. Mass transport characteristics of the two species, in bulk hydrogel and at micropipette meniscuses of different radii, are examined in detail in the frame of existing theory. For comparison, voltammetric measurements are also performed with micropipettes filled with the corresponding aqueous solutions. It is shown that the gel-filled micropipette, at variance with the aqueous one, prevents the spreading and leakage of solution on the sample surface. The microprobe developed here can be useful to perform electrochemical measurements on surfaces, which suffer from direct contact with liquid electrolytes. A proof-of-concept hydrogel-capillary measurement is performed to distinguish the presence of metallic silver deposited on a graphite-on-paper–based material, realized through simple pencil strokes. [Figure not available: see fulltext.].