Photoelectrochemical (PEC) water splitting reactions are promising for sustainable hydrogen production from renewable sources. We report here, the preparation of α-Fe2O3/Fe3O4 composite films via a single-step chemical vapor deposition of [Fe(OtBu)3]2 and their use as efficient photoanode materials in PEC setups. Film thickness and phase segregation was controlled by varying the deposition time and corroborated through cross-section Raman spectroscopy and scanning electron microscopy. The highest water oxidation activity (0.48 mA/cm2 at 1.23 V vs RHE) using intermittent AM 1.5 G (100 mW/cm2) standard illumination was found for hybrid films with a thickness of 11 μm. This phenomenon is attributed to an improved electron transport resulting from a higher magnetite content toward the substrate interface and an increased light absorption due to the hematite layer mainly located at the top surface of the film. The observed high efficiency of α-Fe2O3/Fe3O4 nanocomposite photoanodes is attributed to the close proximity and establishment of 3D interfaces between the weakly ferro- (Fe2O3) and ferrimagnetic (Fe3O4) oxides, which in view of their differential chemical constitution and valence states of Fe ions (Fe2+/Fe3+) can enhance the charge separation and thus the overall electrical conductivity of the layer.

Electronically-Coupled Phase Boundaries in α-Fe2O3/Fe3O4 Nanocomposite Photoanodes for Enhanced Water Oxidation

Vomiero, Alberto;
2019-01-01

Abstract

Photoelectrochemical (PEC) water splitting reactions are promising for sustainable hydrogen production from renewable sources. We report here, the preparation of α-Fe2O3/Fe3O4 composite films via a single-step chemical vapor deposition of [Fe(OtBu)3]2 and their use as efficient photoanode materials in PEC setups. Film thickness and phase segregation was controlled by varying the deposition time and corroborated through cross-section Raman spectroscopy and scanning electron microscopy. The highest water oxidation activity (0.48 mA/cm2 at 1.23 V vs RHE) using intermittent AM 1.5 G (100 mW/cm2) standard illumination was found for hybrid films with a thickness of 11 μm. This phenomenon is attributed to an improved electron transport resulting from a higher magnetite content toward the substrate interface and an increased light absorption due to the hematite layer mainly located at the top surface of the film. The observed high efficiency of α-Fe2O3/Fe3O4 nanocomposite photoanodes is attributed to the close proximity and establishment of 3D interfaces between the weakly ferro- (Fe2O3) and ferrimagnetic (Fe3O4) oxides, which in view of their differential chemical constitution and valence states of Fe ions (Fe2+/Fe3+) can enhance the charge separation and thus the overall electrical conductivity of the layer.
2019
2
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in ARCA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10278/3719250
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 33
  • ???jsp.display-item.citation.isi??? 27
social impact