This work reports the preparation, characterization and test in a single fuel cell of two families of hybrid inorganic-organic proton-conducting membranes, each based on Nafion and a different "core-shell" nanofiller. Nanofillers, based on either a ZrO2 "core" covered with a HfO2 "shell" (ZrHf) or a HfO2 "core" solvated by a "shell" of SiO2 nanoparticles (SiHf), are considered. The two families of membranes are labelled [Nafion/(ZrHf)(x)] and [Nafion/(SiHf)(x)], respectively. The morphology of the nanofillers is investigated with high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDX) and electron diffraction (ED) measurements. The mass fractions of nanofiller x used for both families are 0.05, 0.10 or 0.15. The proton exchange capacity (PEC) and the water uptake (WU) of the hybrid membranes are determined. The thermal stability is investigated by high-resolution thermogravimetric measurements (TGA). Each membrane is used in the fabrication of a membrane-electrode assembly (MEA) that is tested in single-cell configuration under operating conditions. The polarization curves are determined by varying the activity of the water vapour (a(H2O)) and the back pressure of the reagent streams. A coherent model is proposed to correlate the water uptake and proton conduction of the hybrid membranes with the microscopic interactions between the Nafion host polymer and the particles of the different "core-shell" nanofillers.

This work reports the preparation, characterization and test in a single fuel cell of two families of hybrid inorganic-organic proton-conducting membranes, each based on Nafion and a different "core-shell" nanofiller. Nanofillers, based on either a ZrO 2 "core" covered with a HfO 2 "shell" (ZrHf) or a HfO 2 "core" solvated by a "shell" of SiO 2 nanoparticles (SiHf), are considered. The two families of membranes are labelled [Nafion/(ZrHf) x] and [Nafion/(SiHf) x], respectively. The morphology of the nanofillers is investigated with high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDX) and electron diffraction (ED) measurements. The mass fractions of nanofiller x used for both families are 0.05, 0.10 or 0.15. The proton exchange capacity (PEC) and the water uptake (WU) of the hybrid membranes are determined. The thermal stability is investigated by high-resolution thermogravimetric measurements (TGA). Each membrane is used in the fabrication of a membrane-electrode assembly (MEA) that is tested in single-cell configuration under operating conditions. The polarization curves are determined by varying the activity of the water vapour (a H2O) and the back pressure of the reagent streams. A coherent model is proposed to correlate the water uptake and proton conduction of the hybrid membranes with the microscopic interactions between the Nafion host polymer and the particles of the different "core-shell" nanofillers. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights.

Inorganic-organic membranes based on Nafion, [(ZrO2)center dot(HfO2)(0.25)] and [(SiO2)center dot(HfO2)(0.28)]. Part I: Synthesis, thermal stability and performance in a single PEMFC

POLIZZI, Stefano
2012-01-01

Abstract

This work reports the preparation, characterization and test in a single fuel cell of two families of hybrid inorganic-organic proton-conducting membranes, each based on Nafion and a different "core-shell" nanofiller. Nanofillers, based on either a ZrO 2 "core" covered with a HfO 2 "shell" (ZrHf) or a HfO 2 "core" solvated by a "shell" of SiO 2 nanoparticles (SiHf), are considered. The two families of membranes are labelled [Nafion/(ZrHf) x] and [Nafion/(SiHf) x], respectively. The morphology of the nanofillers is investigated with high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDX) and electron diffraction (ED) measurements. The mass fractions of nanofiller x used for both families are 0.05, 0.10 or 0.15. The proton exchange capacity (PEC) and the water uptake (WU) of the hybrid membranes are determined. The thermal stability is investigated by high-resolution thermogravimetric measurements (TGA). Each membrane is used in the fabrication of a membrane-electrode assembly (MEA) that is tested in single-cell configuration under operating conditions. The polarization curves are determined by varying the activity of the water vapour (a H2O) and the back pressure of the reagent streams. A coherent model is proposed to correlate the water uptake and proton conduction of the hybrid membranes with the microscopic interactions between the Nafion host polymer and the particles of the different "core-shell" nanofillers. © 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights.
File in questo prodotto:
File Dimensione Formato  
2012_JHydrEner.pdf

accesso aperto

Tipologia: Documento in Post-print
Licenza: Accesso gratuito (solo visione)
Dimensione 2.23 MB
Formato Adobe PDF
2.23 MB Adobe PDF Visualizza/Apri

I documenti in ARCA sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10278/33008
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 52
  • ???jsp.display-item.citation.isi??? 38
social impact